Show simple record

dc.contributor.authorMcCulloch, N.
dc.contributor.authorPatel, Yusef
dc.contributor.authorPotauaine, S.
dc.date.accessioned2021-04-08T20:34:35Z
dc.date.available2021-04-08T20:34:35Z
dc.date.issued2021-03-18
dc.identifier.issn2463-4190
dc.identifier.urihttps://hdl.handle.net/10652/5263
dc.description.abstractINTRODUCTION: EDFAB: Eco-digital Fabrication Research Project was a collaboration between researchers and students from the University of Auckland’s and Unitec Institute of Technology’s Schools of Architecture. The research sought to investigate and develop a new housing typology with off-the-shelf materials and simple digital fabrication machinery. EDFAB aims to radically challenge conventional construction processes and relationships by proposing an alternative fabrication process to address problems of affordability, personalisation, energy performance and indoor comfort. The research investigates how simple automated technology can enhance the design process, labour, productivity, organisation and quality in ways that avoid stigmatising construction professionals. Over the past six years, there have been four major project iterations of EDFAB. As New Zealand’s construction sector is largely comprised of small-to-medium enterprises (SMEs),1 design concepts were developed to provide a pathway for conventional building contractors to upskill and increase productivity. The purpose of EDFAB, therefore, was to investigate what possible added-value changes could be made to existing balloon-framing house methodologies with 3-axis CNC automated processes. The original EDFAB prototype investigated the design and fabrication of a 10sqm ‘plywood centric’ proof of concept that was displayed at the 2014 Whau Arts Festival (Figure 1). In 2015, University of Auckland architecture students designed EDFAB 2.0, a 10sqm plywood and laminated veneer lumber (LVL) iteration on the original prototype. This prototype sought to reduce waste and simplify design complexities. The design worked on the premise of CNC milling plywood components to create modular boxes. The LVL was cut and assembled into portal frames to provide structure and flexibility to the construction system. In 2017, students furthered the research by producing the EDFAB 3.0: Living Pod for the ‘Prefab NZ Interactive Display, Brought to You by Unitec’ exhibit at the BuildNZ | Designex expo (Figure 2). The purpose of the iteration was to seek industry feedback and refine details from the previous iteration. In 2019, the 65sqm two-bedroom EDFAB 4.0: The Carter Holt Harvey Research House was built in a collaboration between students, researchers and building contractors. The development sought to resolve deficiencies in the assembly process, include building contractors in the construction process and reduce the dependency on CNC plywood components by discarding the portal frame.en_NZ
dc.language.isoenen_NZ
dc.publisherUnitec ePressen_NZ
dc.rightsAttribution-NonCommercial-NoDerivatives 4.0 International*
dc.rights.urihttp://creativecommons.org/licenses/by-nc-nd/4.0/*
dc.subjectNew Zealanden_NZ
dc.subjectplywood housesen_NZ
dc.subjectdigital fabricationen_NZ
dc.subjectarchitecture educationen_NZ
dc.subjectprototypingen_NZ
dc.subjectdesign builden_NZ
dc.subjectprefabricationen_NZ
dc.subjectcomputer numerical control (CNC)en_NZ
dc.subjectCAD/CAM (computer aided design/computer aided manufacture)en_NZ
dc.titleEDFAB : design and building of a plywood research houseen_NZ
dc.typeJournal Articleen_NZ
dc.rights.holderAuthorsen_NZ
dc.subject.marsden120202 Building Science and Techniquesen_NZ
dc.subject.marsden130299 Curriculum and Pedagogy not elsewhere classifieden_NZ
dc.subject.marsden120199 Architecture not elsewhere classifieden_NZ
dc.identifier.bibliographicCitationMcCulloch, N., Patel, Y., & Potauaine, S. (2020). EDFAB : design and building of a plywood research house. Asylum 2020/4, 182-189.en_NZ
unitec.publication.spage182en_NZ
unitec.publication.lpage189en_NZ
unitec.publication.volume4en_NZ
unitec.publication.titleAsylum 2020en_NZ
unitec.peerreviewedyesen_NZ
dc.contributor.affiliationUnitec Institute of Technologyen_NZ
dc.contributor.affiliationUniversity of Aucklanden_NZ
unitec.identifier.roms65365
unitec.relation.epresshttps://www.unitec.ac.nz/epress/index.php/asylum-2020-4-4/en_NZ
dc.identifier.orcid0000-0002-3032-8029en_NZ
dc.identifier.orcid0000-0001-6389-0969en_NZ
dc.identifier.orcid0000-0002-2928-6642en_NZ
unitec.publication.placeMount Albert, Auckland, New Zealanden_NZ
unitec.institution.studyareaArchitectureen_NZ
unitec.institution.studyareaArchitecture


Files in this item

Thumbnail
Thumbnail

This item appears in

Show simple record

Attribution-NonCommercial-NoDerivatives 4.0 International
Except where otherwise noted, this item's license is described as Attribution-NonCommercial-NoDerivatives 4.0 International

© Unitec Institute of Technology, Private Bag 92025, Victoria Street West, Auckland 1142