Show simple record

dc.contributor.authorLiang, Yifeng
dc.date.accessioned2019-09-10T02:29:10Z
dc.date.available2019-09-10T02:29:10Z
dc.date.issued2017
dc.identifier.urihttps://hdl.handle.net/10652/4691
dc.description.abstractARCHITECTURAL QUESTION: How can prefabricated flexible housing adapt to the changing needs and increasing density of Auckland? ABSTRACT: Auckland currently has a rapidly increasing population and changing household demographics. This has led to a demand for more sustainable housing solutions. Medium-density Housing (MDH) and prefabricated (Prefab) techniques are currently the focus of interest. The former is considered to be a solution to reduce urban housing problems, while the latter, can improve housing productivity, affordability, and construction efficiency. This paper is based on contemporary MDH principles and prefab technology in order to find a new progressive solution that integrates flexible housing design methods. The final outcome of the proposal is to develop various flexible housing typologies that promote diversity to respond to the changing needs of users and to increase adaptability to the variety of different sites in Auckland. Flexible housing is relatively new to New Zealand, therefore there is a lack of practical experience that can be referenced. In order to improve the feasibility of this project in a real world context, this paper will start with the study of 32 existing housing precedents in Auckland and with some underlying design principles so the possibilities can be summarized to guide the design process that follows. The design prototypes will be further tested on one section of the site, followed by an evaluation procedure using three MDH standards. Finally, the knowledge and experience will be applied to re-develop the entire site. Flexibility and diversity are the two keywords that will be used to answer the research question. The technical solution -a prefabricated timber hybrid (module plus panel) system is used for the final realization. If this project is proven to be viable, it will provide a valuable alternative for the changing housing needs in Auckland.en_NZ
dc.language.isoenen_NZ
dc.subjectAuckland, New Zealanden_NZ
dc.subjectNew Zealanden_NZ
dc.subjecthousing in Aucklanden_NZ
dc.subjectmedium-density housingen_NZ
dc.subjectflexible housingen_NZ
dc.subjectprefabricationen_NZ
dc.subjectAuckland Unitary Planen_NZ
dc.subjectprefaben_NZ
dc.subjectfree-plans (architecture)en_NZ
dc.titleThe flexible housing : a variation responds to higher density planningen_NZ
dc.typeMasters Thesisen_NZ
thesis.degree.nameMaster of Architecture (Professional)en_NZ
thesis.degree.levelMastersen_NZ
thesis.degree.grantorUnitec Institute of Technologyen_NZ
dc.subject.marsden120101 Architectural Designen_NZ
dc.identifier.bibliographicCitationLiang, Y. (2017). The flexible housing: A variation responds to higher density planning (Unpublished document submitted in partial fulfilment of the requirements for the degree of Master of Architecture (Professional)). Unitec Institute of Technology, Auckland, New Zealand. Retrieved from: https://hdl.handle.net/10652/4691en_NZ
unitec.pages126en_NZ
dc.contributor.affiliationUnitec Institute of Technologyen_NZ
unitec.advisor.principalSu, Bin
unitec.advisor.associatedByrd, Hugh


Files in this item

Thumbnail

This item appears in

Show simple record