Show simple record

dc.contributor.authorMollah, K. U. Z.
dc.contributor.authorBahadornejad, Momen
dc.contributor.authorNair, N. K. C.
dc.date.accessioned2018-05-24T00:55:50Z
dc.date.available2018-05-24T00:55:50Z
dc.date.issued2014-09
dc.identifier.isbn9780646923758
dc.identifier.urihttps://hdl.handle.net/10652/4253
dc.description.abstractIn this paper a platform is developed to facilitate the control of household loads using communication protocols relevant to home automation and substation automation systems. Protection IEDs that support IEC 61850 standard based protocol, universal secondary test gear for relays and a protocol converter are used to realize the protection/automation aspects for substation automation. The retrofitting of the latest relay IEDs with the existing control center software has also been demonstrated. In the home automation space, the available commercial Programmable Logic Controller (PLC) and IEDs are used to develop the platform. The automation load control scheme is programmed based on IEC 61131 standards using structural language and is implemented through EtherCAT protocol. The PLC uses the IEC 61850 server to communicate and gather raw data form the power measurement terminal. The developed platform establishes different aspects of automation and standard based communication system identified the Smart Grid framework. This prototype integrates two different vendors’ intelligent electronic devices and implements a smart load shedding algorithm which controls load in real time. This research supported financially by the New Zealand Ministry of Business, Innovation and Employment (MBIE) GREEN Grid project funding (2012-18). K. Mollah (kmol006@aucklanduni.ac.nz), M.Bahadornejad (m.bahadornejad@auckland.ac.nz), and N. –K.C. Nair (Email: n.nair@auckland.ac.nz) are with the Power Systems Group of Department of Electrical & Computer Engineering at University of Auckland, New Zealand.en_NZ
dc.language.isoenen_NZ
dc.publisherInstitute of Electrical and Electronics Engineers (IEEE)en_NZ
dc.relation.urihttps://ieeexplore.ieee.org/document/6966590/en_NZ
dc.subjectautomationen_NZ
dc.subjectGreen Grid Project 2012-18 (N.Z.)en_NZ
dc.subjectsmart griden_NZ
dc.subjectload sheddingen_NZ
dc.subjecthome automationen_NZ
dc.subjectProgrammable Logic Control (PLC)en_NZ
dc.subjectIntelligent Electronic Devices (IED)en_NZ
dc.titleStandards based household load control prototypeen_NZ
dc.typeConference Contribution - Paper in Published Proceedingsen_NZ
dc.date.updated2018-05-05T14:30:10Z
dc.identifier.doidoi:10.1109/AUPEC.2014.6966590en_NZ
dc.subject.marsden090607 Power and Energy Systems Engineering (excl. Renewable Power)en_NZ
dc.identifier.bibliographicCitationMollah, K. U. Z., Bahadornejad, M., & Nair, N. K. C. (2014). Standards based household load control prototype. Proceedings of the Australasian Universities Power Engineering Conference (AUPEC 2014) (pp. 1-6).en_NZ
unitec.publication.spage1en_NZ
unitec.publication.lpage6en_NZ
unitec.conference.titleProceedings of the Australasian Universities Power Engineering Conference (AUPEC 2014)en_NZ
unitec.conference.orgAustralasian Universities Power Engineering Conference (AUPEC)en_NZ
unitec.conference.locationPerth, West Australia, Australiaen_NZ
unitec.conference.sdate2014-09-29
unitec.conference.edate2014-10-01
unitec.peerreviewedyesen_NZ
unitec.identifier.roms61403en_NZ


Files in this item

Thumbnail

This item appears in

Show simple record