Show simple record

dc.contributor.authorLoo, Wei
dc.contributor.authorQuenneville, P.
dc.contributor.authorChouw, N.
dc.date.accessioned2017-08-07T21:55:55Z
dc.date.available2017-08-07T21:55:55Z
dc.date.issued2014-09
dc.identifier.urihttp://hdl.handle.net/10652/3912
dc.description.abstractIn terms of seismic performance, timber structures have been observed to perform well, in spite of timber being an inherently non-ductile material. This is due mainly to the ductility of the steel-to-timber connections, and the way in which they interact with the timber material. If these connections are detailed to deform plastically, while keeping the timber members elastic, the overall structure achieves ductility. For nailed sheathing-to-framing shear walls and floor diaphragms, the New Zealand structural timber code, NZS3603:1993 [1] allows ductilities of up to four to be assumed. The issue with such an approach is that in a design level earthquake, the deformations required to achieve ductility often renders the structure irreparable, or at least requiring expensive repairs. Recent developments in engineered lumber products have seen the availability of mass timber panels of tremendous strength and stiffness. These include CLT (cross laminated timber) and LVL (laminated veneer lumber) panels. Under typical loading conditions these panels are essentially rigid, and the experiments of Popovski and Karacabeyli [2] demonstrate that the hysteretic behaviour is largely governed by the plastic deformations in the steel bracket connections attaching the walls to the floor. The hysteretic loops bear some resemblance to those of sheathing to framing shear walls, the main difference being they are more tightly pinched. The seismic performance of such walls is adequate, however, damage is still a consequence after an earthquake.en_NZ
dc.language.isoenen_NZ
dc.subjectshear wallsen_NZ
dc.subjectelasto-plasticen_NZ
dc.subjectslip-friction connectorsen_NZ
dc.subjectenergy-dissipationen_NZ
dc.subjectductilityen_NZ
dc.subjecttimber structuresen_NZ
dc.subjectearthquake-resistanten_NZ
dc.subjectrocking wallsen_NZ
dc.titleAn elastoplastic solution for earthquake resistant rigid timber shear wallsen_NZ
dc.typeConference Contribution - Oral Presentationen_NZ
dc.date.updated2017-07-11T00:04:50Z
dc.rights.holderAuthorsen_NZ
dc.subject.marsden090504 Earthquake Engineeringen_NZ
dc.identifier.bibliographicCitationLoo, W.Y., Quenneville, P., & Chouw, N. (2014). An elastoplastic solution for earthquake resistant rigid timber shear walls. Paper presented at INTER - International Network on Timber Engineering Research, September, 2014, Bath, United Kingdom.en_NZ
unitec.publication.titleINTER - International Network on Timber Engineering Research, September, 2014en_NZ
unitec.conference.titleINTER - International Network on Timber Engineering Research (2014)en_NZ
unitec.conference.orgINTER - International Network on Timber Engineering Researchen_NZ
unitec.conference.locationBath, United Kingdomen_NZ
unitec.conference.sdate2014-09
unitec.conference.edate2014-09
unitec.peerreviewedyesen_NZ
unitec.identifier.roms57819en_NZ


Files in this item

Thumbnail

This item appears in

Show simple record